25 PRODUCT INFORMATION VIDEO
https://youtu.be/mE0Pl4j-GDY
24 PRODUCT INFORMATION PDF for P-51CE, Rebuild Directions
P51CE Rebuild
23 PRODUCT INFORMATION VIDEO
Ammonia Flow Explained
22 PRODUCT INFORMATION VIDEO
Steering Tracks

1:06
21 PRODUCT INFORMATION VIDEO
 
ZHX2000 - Corken Internal Pump Bypass Setting.Water Test :235 PSI
20 PRODUCT INFORMATION VIDEO
Complementary Deere Information For Exactrix Engineers. GPS Guidance, ITEC Implement performance
19 PRODUCT INFORMATION VIDEO  05/16/2021
 Guy Swanson Compares The C, CE and CUE Mustang Openers
15:20
18 PRODUCT INFORMATION VIDEO  12/16/2020
 Guy Swanson Explains Doubling The Ammonia Flow

4:03
17 PRODUCT TRAINING VIDEO
2018 Exactrix Training - Troy Coen and Guy Swanson Discuss the TAPPS Formulator and Blender system

32.20
16 PRODUCT TRAINING VIDEO
Mustang Training P-51CUE With Guy Swanson
11:31
15 PRODUCT INFORMATION VIDEO
Reviewing The Exactrix 2KC Weigh Master SERIES 3
15:30
14 PRODUCT INFORMATION VIDEO
Reviewing The Exactrix 2KC Weigh Master

6:52
13 PRODUCT INFORMATION VIDEO
Reviewing the Exactrix dual stage manifold and final filters. 

Terms, dual stage accumulator,  piston, glide ring, accumulator final filter, BPOR or Back Pressure Orifice Restrictor, BPOR vaporizer outlet,  manifold adapter, ferrule, range orifice, manifold, 3 different line sizes.
12:48
12 PRODUCT INFORMATION VIDEO
Reviewing the Deere GS-2 and GS-3 Controller.

Terms, variable rate response, electronic gauge panel, quick response, electronic pressure gauges, electronic rpm, valve timing, dual stage manifold, valve settings. 
21:25

11 PRODUCT INFORMATION VIDEO

Reviewing TAPPS formulators, 2KP Series system with positive displacement pumps.

Terms, Ammonium Poly Phosphate, 10-34-0, Ammonium Thio-Sulfate,12-0-0-26S liquid fertilizer, Arag primary filters, extra elements, hydraulic flow control valve.  positive displacement pump, 350 psi, chloride in the flow, polypropylene construction, Arag magnetic reluctance flow meter. 
6:51

10 PRODUCT INFORMATION VIDEO
Reviewing the Phase Shifter, Vaporizer Filter and Vaporizer Orifice.

Terms,  check valve, stack of magnets, chilling in the corners, tan line orifice at .021, 72T, Green Tape, Screen 100 mesh, line strainer 100 mesh, 1 pint per minute flow.
4:11

9 PRODUCT INFORMATION VIDEO
Reviewing the 2KC Weigh Master based on flow path,

Terms, phase shifter Inlet, phase shifter core, filter, view window, sliding vane pump, six vanes, rotational sensitive, vane pump  turns in one direction ,  vaporizer housing, pre-chill of NH3 flow, 3 minute drain out, mass flow meter, hydraulic motor drives Corken sliding vane pump, weighing the material, loop tube technology, accuracy at 30 lbs. on 10,000 lbs. applied in all temperature and flow ranges. Micro Motion mass flow meter,  totalizer readout, voltmeter, power supply, discharge valve, 9 manifolds. 
13:37

8 PRODUCT INFORMATION VIDEO
Reviewing the nomenclature for the 2KC and 2KP system.

Term, gauge panel, pump RPM, uniform application, sliding vane pump, phase shifter mass meter, terminal orifice, TAPPS, Tri-ammonium Poly Phosphate, liquid pump, poly construction, chloride, PD pump, dual stage manifold, orifice at 1% coefficient of variation.
8:43

7 PRODUCT INFORMATION VIDEO
Reviewing  Adjustments To The New Mustang Closing Wheel
13:58
6 PRODUCT INFORMATION VIDEO
Reviewing the Mustang  P-51 CUE installed on the New Exactrix Hillside Toolbar
6:53
 
 5 PRODUCT INFORMATION VIDEO
Reviewing the Mustang  Swiveling Opener Components
3:10
4 PRODUCT INFORMATION VIDEO
Reviewing the Mustang P-51C and the Mustang P-51 CUE
25:54
3 PRODUCT INFORMATION VIDEO
Reviewing The Exactrix 2KR, Dual Range Formulator, Micro Nutrients, Hydra Hume, 2KP, 2KC, Trimble Control.

22:37
2 PRODUCT INFORMATION VIDEO
Reviewing The  Economic Advantages In Crop Production Part- 1-  of our Educational Series
7:36
2 PRODUCT INFORMATION VIDEO
Reviewing  Sinusoidal Flow Part -  2 of our Educational Series
3:17
1 PRODUCT INFORMATION VIDEO
Reviewing The Manufacturing Process of Tri - Ammonium Poly Phosphate Sulfate 

Part -  3 of our Educational Series
5:54
   
   

 

For More Information:
509.254 6854